| H
I G H
L I G
H T S |
| Depth
Measuring Device (Optional) |
 |
|
•
Base,
Cross Slide, Table, Column and
Boringhead (gear box)
are of fine-grained,
graded alloy casting. Stress
relief after
rough machining ensure rugged and
vibration free operation of the machine.
• Boring head setting with tappered gibs to
avoid
vibration and achieve better boring
accuracy.
• Auto stop of
spindle rotation and rapid
return of boring head after
completion of
boring operation.
• Anti-friction wear
resistant liners provided
on all sliding surfaces of
the boring head to
minimise wear and tear.
• Engine block stud
need not be removed
while boring
• Tool setting
micrometer can be fixed on the
boring spindle to
achieve accurate tool
setting
• 4 spindle speed
and feed combination to
achieve better surface finish
and fast boring
operation.
• Spindle speed gear
are hardened and
ground
• Manual fine feed
hand wheel for counter and
chamfering located on the
right hand side of
the boring head for easy operation.
• Forced lubrication
system provided inside
gear box.
• Control box for
various functions has been
provided on the right hand
side and at a
comfortable position.
• Can bore 'V' type
cylinder blocks with
universal fixture
• Gear box sliding
guideways are fully
covered by bellow. |
| |
HPS-1200
STANDARD ACCESSORIES |
|
|
| •
Setting up parallel - 100 |
1
Pair |
| •
Setting up parallel - 200 |
1
Pair |
| •
Boring tools (L-47,67,75,95) |
4
Nos |
•
Chamfering cum facing tools
(L-60&90) |
2
Nos |
•
Tool Setting Micrometer with
bracket |
1
No. |
•
Table gib adjusting handle
|
1
No. |
| •
Alankey set (9 Nos.) |
1
set |
| •
Double End Spanner 24/26 |
1
No. |
| •
T-Bolt, Washer with nut |
12
Nos. |
| •
Block Tightening Clamp |
4
Nos |
| •
Boring Spindle Dia 60 |
1
No. |
•
Centering Device For ø 60
spindle |
1
No. |
| •
Boring Spindle Dia 85 |
1
No. |
•
Centering Device For ø 85
spindle |
1
No. |
| •
Levelling plate |
3
Nos |
•
Levelling bolt with Nut
(M16-50) |
3
Nos. |
| •
Foundation Bolt with Nut |
3
Nos |
| •
Oil Gun |
1
No. |
| •
'T' handle Alankey-4mm |
1
No. |
| •
'T' handle Alankey-5mm |
1
No. |
| |
|
|
| |
HPS-1200
OPTIONAL
ACCESSORIES |
|
|
• Boring Spindle Dia 30
• Boring Spindle Dia 46
• Boring Dia 120 & Dia 140 |
• Depth measuring device
• 'V' type cylinder block clamping
fixture
• Quick clamping device
|
| |
| TECHNICAL
DETAILS |
| •
Boring Capacity |
62-150mm(2.5"-5.9") |
|
| •
Boring Capacity with extra spindle |
32-190mm
1.25"-7.4" |
| •
Max Boring Head travel |
650mm(25.5") |
| •
Spindle Speeds |
75,150,240,480
rpm |
| •
Spindle Feeds |
0.05,
0.08, 0.10, 0.15(0.002", 0.003",
0.004", 0.006") |
| •
Max Distance from Spindle centre to column |
360
mm (14.17") |
| •
Working Table Size |
1200x360(47.2"x14.17") |
| •
Table Traverse-Crosswise |
75
mm (2.9") |
| •
Motor Spindle Drive |
1.2/1.5HP,
750/1500rpm |
| •
Motor Rapid |
0.5
HP 900 rpm |
| •
Length of the Machine |
1900mm
(74.8") |
| •
Height of the Machine |
2440mm
(96") |
| •
Width of the Machine |
1200
mm (47.2") |
| •
Work space required (LxW) |
2330mmx1400mm
(91.7"x55") |
| •
Work
height required |
2640
mm(104") |
| •
Net Weight (Approx) |
2500
kg |
| •
Gross Weight (Approx) |
3400
kg |
| •
Shipping Volume |
8
m3 |
