Applied Mems - An Input/Output Company
 
PRODUCT RANGE    
                     





STANDARD ACCESSORIES OPTIONAL ACCESSORIES
1. Main Motor
2. Feed Motor
3. Coolant Motor
4. All electrical Controls		 1. Dividing Head
2. Rack Cutting Attachment
3. Slotting attachment
4. Rotary Table
5. Hobbing attachment
6. Milling Vice
7. Vertical Head



MODEL           HPS -2B
                		            HPS -3B
             		            HPS -4B
   		            HPS -5B
    
MM INCH MM INCH MM INCH MM INCH
TABLE
Working Surface 1270x290 50x11.5 1400x330 55x13 1600x356 63x14.25 1800x400 70.75x15.75
Swivel ± 45o ± 45o ± 45o ± 45o ± 45o ± 45o ± 45o ± 45o
T-Slot Nos/Size 3,17 3,0.7 3,17 3,0.7 3,17 3,0.7 4,20 4,0.8
T-Slot Centre 65 2.5 80 3 90 3.5 80 3
Dist. From Spindle Max/Min 380,0 15,0 430,0 17,0 480,0 18.75,0 600,50 23.5,2
Longitudinal Travel 635 25 765 30 890 35 1200 47.25
Cross Travel 205 8 255 10 305 12 450 17.75
Vertical Travel 410 16 500 19.5 550 21.5 650 25.5
FEEDS :
No. of Feeds 18 18 18 18 18 18 18 18
Long.Range Feed/Min 13 - 305 .5 - 12 13 - 305 .5 - 12 13 - 305 .5 - 12 13 - 305 .5 - 12
Cross Range Feed/Min 13 - 305 .5 - 12 13 - 305 .5 - 12 13 - 305 .5 - 12 13 - 305 .5 - 12
Vertical Range Feed/Min 2.5 - 62 2.5- 2.5 2.5 - 62 2.5- 2.5 2.5 - 62  2.5- 2.5 2.5 - 62 2.5- 2.5
No. of Rapid Feeds 2 2 2 2 2 2 2 2
Long. Rapid Feeds/Min 735,1065 29,42 735,1065 29,42 735,1065 29,42 735,1065 29,42
Cross Rapid Feeds/Min 735,1065 29,42 735,1065 29,42 735,1065 29,42 735,1065 29,42
Ver. Rapid Feeds/Min 147,210 5.75,8.25 147,210 5.75,8.25 147,210 5.75,8.25 147,210 5.75,8.25
SPINDLE :
Spindle Speed 12 12 12 12 12 12 12 12
Spindle Speed Range (RPM) 40 - 1120 40 - 1120 40 - 1120 40 - 1120 40 - 1120 40 - 1120 40 - 1120 40 - 1120
Taper Spindle Nose ISO 40 ISO 40 ISO 40 ISO 40 ISO 40 ISO 40 ISO 40 ISO 40
Arbour Diameter 25.4 1 25.4 1 25.4 1 25.4 1
ELECTRICALS :
Main Motor 5HP 5HP 7.5HP 7.5HP 7.5HP 7.5HP 7.5HP 7.5HP
Feed Motor 2HP 2HP 2HP 2HP 2HP 2HP 3HP 3HP
Coolant Motor 0.1HP 0.1HP 0.1HP 0.1HP 0.1HP 0.1HP 0.1HP 0.1HP
DIMENSIONS :
Length 1850 72.75 2000 78.75 2100 82.6 4000 157.5
Width 1600 63 1750 68.75 1950 76.75 2500 98.25
Height 1680 66.25 1800 70.75 1880 74 1980 78
Net Weight in kgs 2600 2600 3300 3300 3700 3700 4500 4500
Gross Weight in kgs 2900 2900 3600 3600 4000 4000 4850 4850

 










STANDARD ACCESSORIES
1. Vertical Attachment

OPTIONAL ACCESSORIES

Slotting Attachment
Dividing Head
Rotary Table
Rack Cutting Attachment



MODEL HPS-0
     		 HPS-1
        		 HPS-1 1/2
         		 HPS-2
         		 HPS-3
          
MM INCH MM   INCH MM  INCH MM  INCH MM INCH
Face of Body - - 228 9 254 10 279 11 304 12
Surface of Table 760x175 30x6.75  1016x228 42x9 1219x254 48x10 1320x279 52x11 1422x304 56x12
No. of tee Slots 3 3 3 3 3 3 3 3 3 3
Size of tee Slots 10 .25 12 .5 12 .5 16 5/8 16 5/8
Swivel either Side of centre line 45º 45º 45º 45º 45º 45º 45º 45º 45º 45º
Longitudinal Traverse 400mm 15.75 457 18 533 21 635 25 711 28
Cross Feed 150 6 125 5 203 8 254 10 304 12
Vertical Traverse 325 12.75 330 13 406 16 558 22 660 26
Standard Arbour 25 1 25 1 25 1 25 1 25 1
Taper of Spindle 1.5º 1.5º ISO 40 ISO 40 ISO 40 ISO 40 ISO 40 ISO 40 ISO 40 ISO 40
No. of Spindle Speed 34,650 1.25,25 152 6 228 9 228 9 228 9
Range of Spindle(RPM) 45 to 500 45 to 500 45 to 550 45 to 550 40 to 675 40 to 675 40 to 675 40 to 675 40 to 675 40 to 675
Dia of Spindle in front of Bearing 40mm 1.5 70 2.75 2.75 2.75 3 3 4 4
No. of Longitudinal feeds 3 3 3 3 3 3 3 3 3 3
Motor Capacity (H.P.) 1 1 2 2 2 2 2 2 3 3
Coolant Pump Capacity 0.1 H.P. 0.1 H.P. 0.1 H.P. 0.1 H.P. 0.1 H.P. 0.1 H.P. 0.1 H.P. 0.1 H.P. 0.1 H.P. 0.1 H.P.
Floor Space 650x400 25.5x15.75 45x20 45x20 45x24 45x24 46x24 46x24 50x30 50x30
Weight     900 kgs 900 kgs 1300 kgs 1300 kgs 1800 kgs 1800 kgs 2100 kgs 2100 kgs



© Copyright 2003 H. P. Singh & Co. All Rights Reserved