Workshop machines, workshop machinery, radial drilling machine, india

SPECIFICATIONS
DESCRIPTION	WDM-50A Single Column (mm)	WDM-50B Double Column (mm)	WDM-65 Double Column (mm)	WDM-75 Double Column (mm)
DRILL HEAD
Drilling Capacity (in Steel)	50	50	65	75
Drilling Depth	225	225	305	355
Taper Spindle Nose socket	M. T. 5	M. T. 5	M. T. 5	M. T. 6
No. of Spindle Speeds & Range	9(45-695 RPM)		12(18-810 RPM)
No. of Spindle Feeds & range	3(0.085-0.185mm/rev)		6(0.12-1.15mm/rev)
Drilling Power	2.2 Kw.	2.2 Kw.	3.7 Kw.	5.5 Kw.
CAPACITY
Drilling Radius :
Maximum	1125	110	1600	1800
Minimum	525	450	500	600
Drilling Head Traverse	900	900	1100	1200
Distance Base Plate to Spindle :
Maximum (when the spindle is in upward position)	1200	1300	1500	1750
Minimum (when the spindle is in upward position)	75	150	100	200
Diameter of Column Sleeve	255	310	355	405
Working Surface of Base Plate :
Length	915	915	1320	1625
Width	660	660	865	900
OTHER DETAILS
Arm Elevating Motor	1.5 Kw.	1.5 Kw.	2.2 Kw.	3.7 Kw.
Standard Box Table	550 mmx400x400mm		600mmx450x450mm
Approx. Weight of Machine	2500 Kgs.	3000 Kgs.	4800 Kgs.	6500 Kgs.

Standard Accessories : Box Table, Electric Motors AC/400/440 Volts, Panel Board for centralised electrical Controls and Limit Switchs.

Special Accessories :Tilting Table, Machine Vice, Machine Lamp, Boring attachment, Tapping attachment.



Manual Microfeed	2 Speed Autofeed

CAPACITY	M.S.	C.I.
Drilling Capacity	38 mm	38 mm
DRILL HEAD
Spindle Nose		MT - 4
Spindle Travel	mm	220
No. of Spindle Speed		8
Range of Spindle speed	RPM	62 - 1980
Range of Power feed	mm./Rev.	(2) 0.08 - 0.04
POWER	H.P	V-BELT
Main Motor	1.5	B - 45
Arm Elevating Motor	0.5	A - 23
WORKING TABLE
L x W X H	mm	380x300x300
WORKING RANGE
Drilling Radius Max. / Min.	mm	895 / 440
Max./ Min. distance Column to Spindle	mm.	810 / 360
Maximum Drill Head Travel	mm.	450
Max. / Min. Base Plate to spindle	mm.	930 / 230
Dia. of Column	mm.	165
Swivel of arm L/ R side		90�
BASE PLATE
L x W x H	mm.	760 x 1250 x150
Working Surface	mm.	820 x 610
No. of T - Slots	mm.	(4) 16
Overall height	mm.	2000
Wooden case L x W x H	mm.	1250 x 1550 x 2000

STANDARD ACCESSORIES
� Motor Pulleys 2 Nos.
� Drill Drift.
� Oil Can

EXTRA ACCESSORIES (At Extra Cost)
� Box Table with T-Slots.
� V-Belt.
� Coolant Pump and Tank with Fittings.
� Electric Control Panel.
� Electric Motor.